6kw Off Grid Inverter

6kw Off Grid Inverter
Product Introduction:
This 6kw Off Grid Inverter converts solar energy into stable AC power while managing battery charging and discharging efficiently. It supports both lead-acid and lithium-ion batteries with self-adapting BMS communication for reliable energy storage management.
Send Inquiry
Description
Technical Parameters

Product Overview

 

This 6kw Off Grid Inverter converts solar energy into stable AC power while managing battery charging and discharging efficiently. It supports both lead-acid and lithium-ion batteries with self-adapting BMS communication for reliable energy storage management.

 

Model

SUN-3K-OG01LP1

SUN-3.6K-OG01LPA-EU-AM2

SUN-5K-OG01LP1-EU-AM2

Battery Input Data

Battery Type

Lead-acid or Lithium-ion

Battery Voltage Range (V)

20-30

40-60

Max. Charging Current (A)

130

90

120

Max. Discharging Current (A)

130

90

120

Charging Strategy for Li-ion Battery

Self-adaption to BMS

Number of Battery Input

1

PV String Input Data

Max. PV Access Power (W)

6000

7200

10000

Max. PV Input Power (W)

4800

5760

8000

Max. PV Input Voltage (V)

500

Start-up Voltage (V)

125

PV Input Voltage(V)

125-500

MPPT Voltage Range(V)

150-425

Full Load MPPT Voltage Range(V)

300-425

Rated PV Input Voltage (V)

370

Max. Operating PV Input Current (A)

18

18+18

Max. Input Short-Circuit Current (A)

27

27+27

No. of MPP Trackers/No. of Strings MPP Tracker

1/1

2/1+1

Max. Inverter Backfeed Current to The Array(A)

0

AC Output Data

Rated AC Output Power (VA/W)

3000

3600

5000

Max. AC Output Power (VA/W)

3000

3600

5000

Max. AC Output Current (A)

13.1

15.7

21.8

Peak Power (W)

2 times of rated power, 10s

Rated Output Voltage (V)

230

Output Type

L+N+PE

Rated Output Frequency

50Hz / 60Hz

Output Voltage Waveform

Pure Sine Wave

Total Current Harmonic Distortion THDi

<3%

AC Input Data(Grid and Generator)

Max. Input Power to Battery (W)

3000

3600

5000

Rated Input Voltage (V)

230

Rated Input Frequency

50Hz / 60Hz

Gird Input Current (A)

35

Generator Input Current (A)

35

Efficiency

Max. Efficiency

97.60%

Euro Efficiency

96.50%

MPPT Efficiency

>99%

Equipment Protection

Integrated

DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC Output Overvoltage Protection, AC

Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Drop Protection, Ground Fault Current Monitoring, Arc Fault

Circuit Interrupter (optional), Power Network Monitoring, Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC Terminal

Insulation Impedance Monitoring, Residual Current (RCD) Detection, Surge protection leve

Surge Protection Level

TYPE II(DC), TYPE II(AC)

Interface

LCD/LED Display

LCD

Communication Interface

WIFI/RS485/CAN/Bluetooth

General Data

Max. Operating Frequency(Hz)

200M

Operating Temperature Range (℃)

-40 to +60℃, >45℃ Derating

Permissible Ambient Humidity

0-100%

Permissible Altitude

3000m

Noise (dB)

<55

Ingress Protection(IP) Rating

IP 65

Inverter Topology

Non-Isolated

Over Voltage Category

OVC II(DC), OVC III(AC)

Cabinet Size (WxHxD mm)

306×427.5×175.77 (Excluding Connectors and Brackets)

Weight (kg)

12.65

Type of Cooling

Intelligent Air Cooling

Warranty

Standard 5 years, extended warranty

Safety / EMC Standard

IEC62109-1/2, EN61000-6-6, EN61000-6-3, EN61000-6-4

 

Product Advantages

 

Supports 10s peak overload for starting high-inductive loads such as air conditioners and water pumps.

 

Compatible with lead-acid and lithium batteries with CAN/RS485 BMS communication.

 

Supports up to 200% PV oversizing (up to 12,000W PV access) with dual MPPT to maximize energy yield under variable conditions.

 

Built-in overvoltage, overcurrent, short circuit, reverse polarity, and thermal protection.

 

IP65 enclosure with intelligent air cooling for stable outdoor operation.

 

Integrated WiFi/RS485/CAN/Bluetooth ports for seamless remote monitoring, O&M, and firmware diagnostics.

 

System Configuration

 

The inverter integrates solar PV input, battery storage, and AC output in a single system architecture.

 

It automatically manages energy flow between PV generation, battery charging/discharging, and load consumption to ensure stable system operation.

 

Supported configurations:

PV + Battery + Load

PV + Battery + Grid backup (if applicable)

Battery-only backup mode

 

Typical Applications

 

Residential Backup: Delivers stable off-grid power and fast UPS-grade backup (<10ms) for remote homes.

 

Commercial & Telecom: Powers remote telecom base stations and agricultural pumping systems reliably.

 

Industrial Cost-Saving: Supports smart scheduling to discharge batteries during peak tariff hours, slashing electricity bills.

 

FAQ

 

Q: Can this inverter operate without a battery?

A: Yes. It supports battery-free operation and can supply AC loads directly from PV when solar power is sufficient.

Q: Does it support parallel operation?

A: Yes. Up to 9 units can be connected in parallel depending on system configuration.

Q: What battery types are supported?

A: It supports both lead-acid and lithium-ion batteries with automatic BMS communication via CAN or RS485.

Q: What protection functions are included?

A: The inverter includes overvoltage, overcurrent, short circuit, reverse polarity, thermal protection, and insulation monitoring functions.

Q: Are official compliance certificates available for local distributor approvals?

A: Yes. Full official test reports and certificates for IEC 62109-1/-2 and EN 61000 series are fully available upon request for your local import compliance.

 

Hot Tags: 6kw off grid inverter, China 6kw off grid inverter manufacturers, suppliers, factory

Model SUN-3K-OG01LP1 SUN-3.6K-OG01LPA-EU-AM2 SUN-5K-OG01LP1-EU-AM2 SUN-6K-OG01LP1-EU-AM2
-24-EU-AM2
Battery Input Data
Battery Type Lead-acid or Lithium-ion
Battery Voltage Range (V) 20-30 40-60
Max. Charging Current (A) 130 90 120 135
Max. Discharging Current (A) 130 90 120 135
Charging Strategy for Li-ion Battery Self-adaption to BMS
Number of Battery Input 1
PV String Input Data  
Max. PV Access Power (W) 6000 7200 10000 12000
Max. PV Input Power (W) 4800 5760 8000 9600
Max. PV Input Voltage (V) 500
Start-up Voltage (V) 125
PV Input Voltage(V) 125-500
MPPT Voltage Range(V) 150-425
Full Load MPPT Voltage Range(V) 300-425
Rated PV Input Voltage (V) 370
Max. Operating PV Input Current (A) 18 18+18
Max. Input Short-Circuit Current (A) 27 27+27
No. of MPP Trackers/No. of Strings MPP Tracker 1月1日 2/1+1
Max. Inverter Backfeed Current to The Array(A) 0
AC Output Data  
Rated AC Output Power (VA/W) 3000 3600 5000 6000
Max. AC Output Power (VA/W) 3000 3600 5000 6000
Max. AC Output Current (A) 13.1 15.7 21.8 26.1
Peak Power (W) 2 times of rated power, 10s
Rated Output Voltage (V) 230
Output Type L+N+PE
Rated Output Frequency 50Hz / 60Hz
Output Voltage Waveform Pure Sine Wave
Total Current Harmonic Distortion THDi <3%
AC Input Date(Grid and Generator)
Max. Input Power to Battery (W) 3000 3600 5000 6000
Rated Input Voltage (V) 230
Rated Input Frequency 50Hz / 60Hz
Gird Input Current (A) 35
Generator Input Current (A) 35
Efficiency
Max. Efficiency 97.60%
Euro Efficiency 96.50%
MPPT Efficiency >99%
Equipment Protection
Integrated DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection, AC Output Overvoltage Protection, AC
Output Short Circuit Protection, DC Component Monitoring, Overvoltage Load Drop Protection, Ground Fault Current Monitoring, Arc Fault
Circuit Interrupter (optional), Power Network Monitoring, Island Protection Monitoring, Earth Fault Detection, DC Input Switch, DC Terminal
Insulation Impedance Monitoring, Residual Current (RCD) Detection, Surge protection leve
Surge Protection Level TYPE II(DC), TYPE II(AC)
Interface
LCD/LED Display LCD
Communication Interface WIFI/RS485/CAN/Bluetooth
General Data
Max. Operating Frequency(Hz) 200M
Operating Temperature Range (℃) -40 to +60℃, >45℃ Derating
Permissible Ambient Humidity 0-100%
Permissible Altitude 3000m
Noise (dB) <55
Ingress Protection(IP) Rating IP 65
Inverter Topology Non-Isolated
Over Voltage Category OVC II(DC), OVC III(AC)
Cabinet Size (WxHxD mm) 306×427.5×175.77 (Excluding Connectors and Brackets)
Weight (kg) 12.65
Type of Cooling Intelligent Air Cooling
Warranty Standard 5 years, extended warranty
Safety / EMC Standard IEC62109-1/2, EN61000-6-6, EN61000-6-3, EN61000-6-4
Send Inquiry
you dream it, we design it
If you have any questions
please contact us
contact us